考虑水头损失的管道灌溉分水口轮灌分组优化模型

【目的】优化灌溉系统中分水口轮灌分组的灌溉制度,在满足流量要求的条件下节约电能。【方法】提出了在考虑水头损失时不同分水口状态与管道进口压力的关系模型,该模型利用分水口开关0,1状态作为自变量,从管道末端起利用推导的递推公式求出管道进水口的等效水头损失系数。依据该模型,在定流量分组轮灌优化中得到为使分组轮灌功率最小的目标函数。利用遗传算法对上述问题进行了优化求解,并给出了编码方案。【结果】在分水口等间隔布置时,轮灌分组按轮灌分组数等间隔安排所需功率最小,优化后的水头损失系数可以减小到没有优化前的0.772倍。【结论】本研究模型不仅适用于恒定流量的组合优化,也可应用于不同分水口的所需水量不同的随机灌溉以及恒压供水的优化中。     

Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

液电混合直线驱动系统位置控制特性研究

提出了一种采用电-机械直线执行器和液压缸的液电混合直线驱动系统。为消除电-机械直线执行器和液压缸之间的耦合影响,液压泵和比例阀协同控制液压缸输出力和运行方向,满足系统负载力需求,电-机械直线执行器用于运动控制,并补偿液压缸输出力波动和外部干扰力。为实现上述目标,设计了基于扩张状态观测器的电-机械直线执行器自适应滑模控制方法,以估计的负载力调节泵压力和比例阀开度,对液压缸输出力进行调控。比例阀在系统运行中主要用于控制液压缸运动方向,阀开度较大,可显著降低节流损失。通过仿真和试验分析了系统的运行特性和能效特性。结果表明,该系统具有良好的位置控制特性,能量效率高,较传统阀控系统能耗减少51%。     

电导法测定林木种子活力的研究

本文研究了林木种子电导法测定条件和测定电导率或相对电导率,通过回归分析建立电导率或相对电导率与种子活力指数的相关方程,找出了电导法测定林木种子活力的方法。     

用简易诊断法检查判断液压系统各元件的工作性能

故障的排除首先在于判断，目前基层维修网点大多数没有检测仪器和设备，出了故障乱拆乱卸，导致液压元件工作失灵，甚至整车液压系统瘫痪。拖拉机液压系统产生故障的主要原因是液压元件工作性能恶化引起的。为此，介绍了在没有检测仪器和设备的条件下，如何应用简易诊断法检查判断各液压元件的工作性能。     

手动比例复合阀在中高压液压绞纲机中的应用

中高压液压技术在海洋捕捞机械—绞纲机中的使用推动了我国渔业机械的发展,手动比例复合阀在中高压液压技术上的应用则大大加快了液压绞纲机在国内渔业生产中的普及。目前,我国浙江、江苏、福建、广东和山东等省沿海渔民使用的绞纲机普遍采用带手动比例复合阀的液压系统。为此,对手动比例复合阀换向、溢流、调速集成等功能进行了分析。     

Evaluation of an electronic device used as a quick screening method to detect changes in the red cell content of the blood in horses participating in endurance trail rides

Dehydration, to varying degrees, will inevitably occur in horses participating in endurance trail rides. This water loss is directly related to the amount of body water lost through evaporative cooling, that in turn being related to the amount and rate of work performed, and to the environmental temperature and humidity.An electronic apparatus that can substitute for the conventional and time-consuming venous haematocrit was developed to measure the animals' hydration status. The mechanism of this electrometer is based upon the relationship between the red cell content and the electrical conductivity of the blood. The electrometer reading gave a significant correlation (p<0.001) with the venous haematocrit, thus indicating that the electrometer is a reliable apparatus for determining the animals' hydration status within seconds of venepuncture.     

农机液压技术的应用与发展

液压技术的应用已成为现代化农业机械的典型标志。为此,介绍了农机液压技术的应用现状;并根据科学技术的发展,简要分析了农机液压技术的发展趋势。     

加热光纤法同步测定土壤水热参数误差分析

土壤水热参数是研究土壤水热传输的基本物理参数。当前热脉冲探针法（HPP）可同步测定土壤水热参数,但该方法仅限于在点尺度下测定。与其具有相同理论基础的加热光纤法（SPHP-DTS）,可将测定尺度增大至田间千米尺度,但其测定精度尚未得到有效验证。为了探知SPHP-DTS法的误差,本研究进行了SPHP-DTS法与HPP法测定土壤水热参数的对比试验。结果表明,以HPP为标准,加热光纤法测定热导率的精度RMSE为0.13 W?m-1?℃-1。SPHP-DTS法测定的热导率显著高于HPP法,主要原因在于加热光纤时产生的温度效应。通过热导率法测定土壤含水率时,在热导率测定误差的影响下,SPHP-DTS法的测定精度明显低于HPP法。SPHP-DTS法测定土壤水热参数的其他误差来源包括光纤与土壤之间多个界面的接触热阻、光纤的温度敏感性、噪音干扰以及温度梯度驱动下的水分迁移。本研究可为SPHP-DTS法提升土壤水热参数测定精度提供理论参考。     

以电导法配合Log istic方程确定茶梅‘小玫瑰’的抗寒性

 摘　要: 以不同处理时间、不同低温处理下茶梅‘小玫瑰’叶片的电解质外渗率(REC) 变化作曲线,并结合Logistic方程分别计算茶梅的半致死温度(LT50 ) , 结果发现在低温处理6 h以上, 茶梅叶片的REC均随着处理温度的降低而呈“S”形上升, 由此计算出“S”形拐点对应的温度即为茶梅叶片的LT50 , 其温度值在- 1215℃至- 14℃之间, 这可认为是茶梅抗寒能力的重要指标。关键词: